Standard Mayhem Rims 

Mayhem “7"   $95.00

~~~~~~~~~~~~~~

Mayhem “Spider” 
$95.00/set +$12.00 Shipping within the USA
Part Number:  ME-1001-N (Narrow)
Part Number:  ME-1001-W (Wide)
Weight = 4.7 oz
Diameter = 2.470 in (62.74mm)
Width = 1.285 in (32.64mm)
Mounting holes = 8 per side
Hex size = 12mm
Hardware M3 X .5 Button Head Stainless Steel
Colors available - red, blue, gold, black, machined finish
Available in: both Wide and Narrow offsets, and aluminum or black delrin

~~~~~~~~~~~~~~

Mayhem “Phatty" not weight (no ball bearings)
$95.00/set + $12.00 Shipping within the USA
Part Number:  ME-1003-N (Narrow)
Part Number:  ME-1003-W (Wide)
Weight = 7.1 oz
Diameter = 2.470 in (62.74mm)
Width = 1.285 in (32.64mm)
Mounting holes = 8 per side
Hex size = 12mm
Hardware M3 X .5 Button Head Stainless Steel
Colors available -     red, blue, gold, black, machined finish,
Available in: both Wide and Narrow offsets, and aluminum or black delrin

Mayhem “Wicked J" avaiable in all Mayhem Offsets  
$95.00/set + $12.00 Shipped within the USA
Part Number:  ME-1006-N-8 (Narrow)
Part Number:  ME-1006-W-8 (Wide)

This wheel is available in any Mayhem Eng. offset

This wheel is available in any Mayhem Eng. offset.
Thanks Wicked_Jester for the design

~~~~~~~~~~~~~~

Standard Competition Double Phatty
2.2 Beadlock Wheels with Live Weights

Competition Double Phatty            
$130.00 + $12.00 shipping within the USA
Part Number ME-1004-Comp (Aluminum or Black Delrin)
Rims available in Aluminum or Delrin

The benefits of this design:
Need only remove outside locking ring to adjust weight

No need to remove the tire, saving time
Adjust weight by adding or subtracting 9/16" ball bearings or stationary weights (stationary weights not provided)

Just about any type of wheel weights (other than bearings) can be used

Ball bearings will always stay at the bottom of the wheel to keep center of gravity at its lowest point

Largest ball bearing 9/16" or smaller can be used

The key to this design using any type of ball bearings is to KEEP them below center line of the wheel; if above center line it will not work as intended. If you are above center line the bearings have a tendency to flop over the top and lose the benefit of keeping the center of gravity at its lowest point.

This design doesn't add a lot of weight, but what weight is there keeps the center of gravity at its most useful point (low in the wheel.                                         Specs:   Aluminum CDP Weight                                                       Rim Only 6.5 oz                                                                    Rim, Ring & Screws 8.4 oz                                                 Rim, Rings, Screws & BB(4) 10.1 oz

Specs:    Delrin CDP Weight:                                                            Rim Only 3.5 oz                                                                   Rim,  Rings and Screws 5.4 oz                                                                                                               Rim, Rings, Screws & BB (4) 7.1 oz

A Set Includes:
Four (4) Mayhem 2.2 Competition Double Phatty Rims – Aluminum or Black Delrin
Four (4) Traditional rings - your choice of color (red, blue, gold, black or machine finish, violet and green are special order)
Four (4) Competition 16 Rings - your choice of color (red, blue, gold, black or machine finish)  - your choice of 8 or 16 mounting holes
Sixteen (16) 9/16" dia. steel ball bearings
128 stainless steel button head screws
Plus engraving (within reason) on any anodized color.
Shipping included within the USA (outside of USA contact us for quote).
Orders being accepted now. Lifetime replacement warranty, excluding anodize and hardware.

We offer two different offsets in our standard 2.2 style rims.
1st Offset - .443 (11.25mm) this is a negative offset, meaning that the bottom of the hex is as close to the hub side as possible. (see Diagram A)  This offset offers a wider track width. Original offset – Wide.

2nd Offset – This offset is .147 (3.7mm) this is also a negative offset.  This offset will bring your wheels closer to the frame, this offers a narrower track width of approximately 10 ¼”.  New offset – Narrow.

Contact:
mayhem_eng@yahoo.com